Blackbox Explorer
Open your helicopter’s Blackbox log to inspect gyro, PID and governor data, sync flight video, and see how your tune performs.
Drop a log or video anywhere
or
Open log file / videoSet up Blackbox logging to onboard flash or SD card from the Configurator's Blackbox tab.
Logging guide →Step through the flight frame by frame, compare workspaces, and use the spectrum analyser to tune your filters.
Keyboard shortcuts are under the ? button in the toolbarExport the graphs as a video overlay, or as CSV to dig in with your own tools.
Export options appear in the toolbar| Raw value | Decoded | Raw value | Decoded | ||
|---|---|---|---|---|---|
|
The custom mixer settings ONLY affect the craft icon that is displayed over the log. Please set the closest craft type (e.g. QuadX) and then identify which motors are connected to which motor outputs. If you deselect the custom setting, then the viewer will function as per the original method (i.e. it will autocalculate the craft model based upon the number of motors found in the log.)
|
Mode 1
Mode 2 Mode 3 Mode 4 |
|
|
% |
% |
% |
|
% |
% |
% |
|
% |
% |
% |
|
% |
% |
% |
|
|
% |
% |
% |
||
|
% |
|
% |
% |
|||
|
% |
To use the lap timer feature, you MUST set a"start time" bookmark at the beginning of the log/video (where the race starts for example) plus additional bookmarks to mark the start of each lap. Bookmark the video frames where you actually cross the start/finish line for best results.